Manifold Sub-Bases - Festo VTSA-44-MP Series Manual

1. Summary of components

1.2.3 Manifold sub-bases

Identification features
Type code
Identifier code on the type plate
of the manifold sub-base
Colour of the solenoid coil
contact
Tab. 1/6: Identification of the manifold sub-bases, width 18 ... 52 mm
Festo P.BE-VTSA-44-EN en 1101f
The number of electrically controllable valve positions depends
on the manifold sub-bases and on the electrical connection
used (see Tab. 1/2 ... Tab. 1/4).
If only manifold sub-bases that support the control of two
solenoid coils per valve position are used, any type of valve
can be placed in any valve position.
If, on the other hand, only manifold sub-bases that control
only one solenoid coil per valve position are used, the valve
terminal can only be equipped with monostable 5/2-way
valves (ident. code M, O, SO or SQ).
Manifold sub-bases, width 18 ... 52 mm
for actuating one solenoid
coil per valve position
VABV-S4-...T1 or
VABV-S2-...T1
Black dot
Red
for actuating two solenoid
coils per valve position
VABV-S4-...T2 or
VABV-S2-...T2
—
Black
1-13