2. Fitting
Contents of this chapter
Additional information
Festo P.BE-VTSA-44-EN en 1101f
The VTSA... valve terminal is already assembled when supplied
from the factory.
This chapter describes how to mount and dismount:
–
The complete valve terminal (H-rail or wall mounting)
–
The mounting bracket for wall mounting
–
The inscription label holders
–
The manual override caps
Special information on replacing or adding pneumatic com-
ponents can be found in Chapter 5.
VTSA... valve terminal with CPX terminal or FB 21 (type 03):
–
Information on connecting the valve terminal with the
CPX terminal can be found in the CPX system manual.
–
Information on connecting and dismantling the I/O modules
can be found in the manual for the CPX I/O modules or in
the additional description of type 03 I/O modules.
–
Information on mounting modules and components
ordered at a later stage can be found in the package
insert.
2-3