Festo VTSA-44-MP Series Manual page 35

1. Summary of components
Festo P.BE-VTSA-44-EN en 1101f
The vertical stacking components on the VTSA... valve
terminal are marked by type codes. The code is marked on
the side of the component. Identification within the type code
indicates the function of the components, e.g. in type code
VABF-S4-1R1C2-C-10, the code R1 indicates that this
component is a P-pressure regulator and the code 10 that the
control range of this pressure regulator goes up to 10 bar.
In the sales documentation and in the Festo Configurator, the
components are marked with an ID code.
You can identify the vertical stacking components with the aid
of the following table.
1-19