Intended Use; Areas Of Application And Approval By Authorities - Festo VTSA-44-MP Series Manual

Contents and general instructions

Intended use

Areas of application and approval by authorities

Festo P.BE-VTSA-44-EN en 1101f
The VTSA... valve terminals described in this manual are
intended for fitting into a machine or automated system.
The user must at all times observe the safety regulations
specified in this manual as well as the instructions concerning
the designated use of the relevant VTSA... valve terminal.
The VTSA... valve terminals may only be used as follows:
– As intended for switching of gaseous media
(see Appendix A "Technical data") in the industrial
environment
– In original status without unauthorised alterations.
Only the conversions or modifications described in the
documentation accompanying the product are permitted.
– In perfect technical condition.
When used together with commercially available components,
such as actuators, the specified limits for pressures, temper-
atures, electrical data, torques etc. must be observed. The
applicable national and local safety regulations must also be
observed.
The product fulfils the requirements of the EU directives and
is marked with the CE marking symbol.
Standards and test values, which the product observes and
fulfils, can be found in the section "Technical specifications".
The product-relevant EU directive can be found in the
declaration of conformance.
VII