1. Summary of components
1
All channels open if not marked
2
Duct (1) closed
Fig. 1/4: Identifying the seal plates
1.2.6 Vertical stacking
Festo P.BE-VTSA-44-EN en 1101f
3
4
You can fit further pneumatic components in each location
between the manifold sub-base and the valve. This vertical
stacking will enable you to implement certain additional
effects as desired.
Tab. 1/8 shows the basic design and possible components of
vertical stacking.
2
1
4
3
Ducts (3) and (5) closed
Ducts (1), (3) and (5) closed
1-17