Festo VTSA-44-MP Series Manual page 31

1. Summary of components
Variants of the right end plate
Selector end plate
Type VABE-...RZ-...B1.
With this end plate, the type of
pilot control (internal or
external pilot air supply) and
the type of removal of pilot air
or venting air (ducted or
unducted) can be selected via
1)
pilot air selector 2.
1)
For notes on adjusting the pilot air selector or on fitting the end plates, see Chapter 3.4.2
Tab. 1/7: Variants of the right end plate for widths 18 ... 52 mm
Festo P.BE-VTSA-44-EN en 1101f
End plates with axial supply connections
Type VABE-...R-...
End plate for operating the valve
terminal with an internal pilot
1)
air supply.
Size 1:
2
Size 2:
Note
Instructions for combining the soft-start valve and the right
end plate can be found in the VABV-S6-1Q-... assembly
instructions.
Type VABE-...RZ-...
End plate for operating the
valve terminal with an external
1)
pilot air supply.
Size 1:
Size 2:
1-15