Festo VTSA-44-MP Series Manual page 154

5. Maintenance and conversion
5-12
Removing the components
1. Unscrew the screws of all components above the respective
position.
2. Remove these components from the valve position.
Mounting new components.
1. Check the seals for damage. Replace the seals if they are
damaged.
2. Place the new component on the valve position or onto a
component already mounted.
3. Fasten the new component. For width across flats of the
hexagon socket wrench, see Tab. 5/4.
Festo P.BE-VTSA-44-EN en 1101f