Festo VTSA-44-MP Series Manual page 15

Contents and general instructions
Term/abbreviation
MO
Multi-pin node,
Cage Clamp
Multi-pin node IC
Multi-pin node
M23 round plug
Multi-pin node, Sub-D
Pneumatic interface
Pneumatic module
Pneumatic supply plate
Selector end plate
Tubing connection
Valve
Valve terminal VTSA
Vertical pressure shut-off
plate
Vertical pressure supply
plate
Tab. 0/1: Product-specific terms and abbreviations
Festo P.BE-VTSA-44-EN en 1101f
Significance
– Manual override
– Interface with terminal strip via which all valve solenoid coils are
centrally connected
– Interface with individual electric connections via which the solenoid
valve coils are individually connected.
– IC = Individual Connector
– Interface with M23 electrical round plug via which all solenoid coils
are centrally connected
– Interface with electrical sub-D multi-pin connection via which all
solenoid coils are centrally connected
– Interface between the modular electric peripherals of the CPX
terminal or the FB 21 (type 03) and the VTSA... pneumatics
– Module consisting of a manifold sub-base, possibly 90°connection
plate, valve or cover plate, possibly with components for vertical
stacking
– Plate within the horizontal stacking for supplying pressure to a
pressure zone
– Extreme right-hand plate of the VTSA... valve terminal with coding
cap
(for selecting the pilot variant and the venting air)
– with pneumatic ports (12) and (14)
– Connecting the supply lines (tubing) to the valve terminal
– Solenoid valve with monostable, impulse or mid-position valve
– Valve terminal VTSA (type 44) or VTSA-F (type 45)
– With CPX terminal
– With FB 21 (type 03)
– AS-interface
– Or with multi-pin node (Sub-D, cage clamp, M23 round plug or IC).
– Plate on a valve location for isolating the valve pressure supply
– Plate on a valve position for individual compressed air supply
XIII