Festo VTSA-44-MP Series Manual page 36

1. Summary of components
Labelling Ident.
in the code
type code
R1-...-6 ZF
R1-...-10 ZA, ZAY
R2-...-6 ZH
R2-...-10 ZC, ZCY
R3-...-6 ZG
R3-...-10 ZB
R4-...-6 ZI, ZIY
R4-...-10 ZD
R5-...-6 ZJ
R5-...-10 ZE, ZEY
R6-...-6 ZM
R6-...-10 ZK
R7-...-6 ZN, ZNY
R7-...-10 ZL
F1B1 X
P1A3 ZU
L1D1 ZT
ZO
Tab. 1/9: Identification of vertical stacking components
1-20
Vertical stacking components
P-pressure regulator plate for port (1)
P-pressure regulator plate for port (1)
B-pressure regulator plate for port (2)
B-pressure regulator plate for port (2),
A-pressure regulator plate for port (4)
A-pressure regulator plate for port (4)
AB-pressure regulator plate for ports (2) and (4)
AB-pressure regulator plate for ports (2) and (4)
Reversible AB-pressure regulator plate for ports (2) and (4)
Reversible AB-pressure regulator plate for ports (2) and (4)
Reversible B-pressure regulator plate for port (2)
Reversible B-pressure regulator plate for port (2)
Reversible A-pressure regulator plate for port (4)
Reversible A-pressure regulator plate for port (4)
Flow control plate for restricting the exhaust in ducts (3) and (5)
Vertical pressure supply plate for providing an individual operating
pressure for a valve position
Vertical pressure shut-off plate for cutting off the individual operating
pressure for a valve position
Intermediate plate for disconnectable pilot air
The circuit symbols of the vertical stacking components can
be found in Appendix B, Tab. B/7 ... Tab. B/9.
Festo P.BE-VTSA-44-EN en 1101f