Festo VTSA-44-MP Series Manual page 171

A. Technical appendix
General
Weights [g]:
– Left end plate (CPX terminal)
– Per complete CPX module
– Pneumatic interface
– Multi-pin node (Sub-D, cage clamp,
M23 round plug, IC connection)
– Per pneumatic supply plate with
exhaust plate or exhaust cover
– Soft-start valve with manifold
sub-base
– Right selector end plate
– right end plate (axial connections)
– per manifold sub-base)
– per 90°-connection plate
– per valve
– Intermediate solenoid plate
– per cover plate for non-assigned
valve position
– per pressure regulator plate (P)
– per pressure regulator plate
(A or B)
– per pressure regulator plate (AB)
– per flow control plate
– per vertical pressure supply plate
– per vertical pressure shut-off plate
1)
without fitting
2)
for widths 18 mm and 26mm for two valve positions,
for widths 42 mm and 52 mm for one valve position
Tab. A/2: General technical data for the VTSA... valve terminal (continued)
Festo P.BE-VTSA-44-EN en 1101f
approx. 80 g
approx. 210 g
1470 g
approx. 550 g
approx. 610 g
1200 g
1)
281 g
Width
18 mm
1)
339 g
1) 2)
447 g
1)
155 g
approx. 180 g
---
34 g
350 g
367 g
611 g
228 g
1)
140g
209 g
Note
– In the case of wall mounting, additional mountings
(angle brackets) must be mounted after every 2 or max.
4 manifold sub-bases, depending on the vibration/shock
stress (see Tab. A/5).
26 mm 42 mm
339 g 339 g
634 g 340 g
217 g 176 g
approx. 320 g approx. 450 g
--- ---
73 g 68 g
402 g 640 g
448 g 640 g
692 g 920 g
320 g 220 g
191 g 340 g
273 g 600 g
52 mm
339 g
591 g
359 g
approx. 726 g
---
145 g
1190 g
1230 g
1990 g
565 g
605 g
1030 g
A-5