5. Lower the Registration/Pickup Unit [1], and tighten the 2 screws [2].
6. Assemble the Registration/Pickup Unit, output a test print, and confirm that images with uneven density (white
spots) are not generated.
7. End if images with uneven density (white spots) are not generated.
Adjust again the Registration/Pickup Unit if images with uneven density (white spots) are generated.
Removing the Delivery/Reverse Unit
■ Preparation
1.
"Removing the Fixing Assembly" on page 254
2x
[1]
289
4. Parts Replacement and Cleaning
[2]
[2]