Procedure For Hmi Embedded And Ht6 - Siemens SINUMERIK 840D sl Commissioning Manual

Expanding the Operator Interface (BE1)
7 Configuring and Working Environment
7.2.3

Procedure for HMI Embedded and HT6

The following chapters restrict themselves to the operations and procedures that
are relevant in conjunction with Expand user interface. More general information is
provided in the startup guide.
The following steps must be taken:
• Prepare files
• Creating a PCMCIA card image
• Transfer the PCMCIA card image to the PCMCIA card
• Transfer PCMCIA card to HMI Embedded
Prepare files
1. Install the system environment on your PC/PG
2. Install the application environment on your PC/PG
3. Archive your display data and screen form configuration files as follows using
the ARJ program supplied:
- Each file is saved in a separate archive
- The archive has the same name as the file, but '_' is used in place of
the last character in the file name extension.
Examples:
abc.com is stored in abc.co_.
my_pic.bin is stored in my_pic.bi_.
ARJ is invoked: arj u my_pic.bi_ my_pic.bin
4. Check whether the total size of your files meet the requirements outlined in
Section 7.2 in terms of definition and size. If not, you must use the following
strategies to reduce the space required by your display images:
- Smaller formats
- Less complexity
- Fewer colors
- Fewer display images
- Removing texts
Enter your files in the same way as you did for previous entries.
Alternative:
If you wish to integrate the texts for configured forms into alarm texts, copy them
using an ASCII editor into file ALUC.TXT in the application environment in the
appropriate language-specific directories.
These files are stored in directories: proj\text\lan under the directory in which
you have installed the application environment.
BE1/7-166
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
© Siemens AG, 2005. All rights reserved
08/2005