Siemens SINUMERIK 840D sl Commissioning Manual page 604

Creating Foreign Language Texts with Windows 2000/ 2003/ XP (TX2)
3 Input of Text
Displaying the language property
In Word 2000/ 2003, the current language property is displayed in the status bar at
the bottom edge of the window.
Fig. 3-11
Setting the language property
Proceed as follows to set the language property for a text:
1. Highlight the part of the text for which you wish to set the language property, or
press CTRL+A to select the entire text.
2. Then select the command "Extras" → "Language" → "Set Language...".
3. In the "Language" dialog box you can choose the correct language. Click on
"OK" when you are done.
Quick setting of the language property
In Microsoft Word 2000/ 2003 you can insert a combined display and selection box
into a symbol bar. This both displays the current language property and enables
you to set the language as well.
Proceed as follows to insert this field into a symbol bar:
1. In the "Extras" menu select the command "Customize..."
Fig. 3-12
2. In the "Customize" dialog box select the "Commands" tab.
3. Select "Tools" from the list of categories on the left.
4. Then select "Language" from the list of commands on the right (see Fig.).
TX2/3-34
SINUMERIK 840D sl/840D/840Di/810D Commissioning CNC Part 2 (HMI) (IAM) – 08/2005 Edition
© Siemens AG, 2005. All rights reserved
08/2005