Siemens SINUMERIK 840D sl Commissioning Manual page 274

Starting Up HMI Embedded (IM2)
3 Communication/Initial Requirements
File types
The file types are set up as needed and are evaluated and displayed by the NCU.
The Program Manager will use the file extensions to filter the files to be displayed
and those to be hidden. This filter function can be set as follows:
If the "New" or "Edit" softkeys are selected, a switch is made to the lower half of the
window where a new extension can be entered or an existing extension edited. To
exit, press "Abort" (without changes) or "Save" (with changes).
3.3.4 Configuring a drive connection using MD
If you do not need more than four drive connections, you can set these up using
machine data.
For the authorization of the input for configuration data, the following display
machine data must be set up:
MD 9509: MM_USER_CLASS_DIRECTORY_CHG (value 0 ... 7)
Display machine data
The following display machine data is available for authorizing the use of the
created drives:
For the "Program" and "Services" areas
MD 9510: MM_USER_CLASS_DIRECTORY1_P
MD 9511: MM_USER_CLASS_DIRECTORY2_P
MD 9512: MM_USER_CLASS_DIRECTORY3_P
MD 9513: MM_USER_CLASS_DIRECTORY4_P
(value 0...7)
For the "Machine" area
MD 9516: MM_USER_CLASS_DIRECTORY1_M
MD 9516: MM_USER_CLASS_DIRECTORY2_M
MD 9516: MM_USER_CLASS_DIRECTORY3_M
MD 9516: MM_USER_CLASS_DIRECTORY4_M
The network drives are configured in the display machine data:
MD 9676: MM_DIRECTORY_SOFTKEY_PATH1
MD 9676: MM_DIRECTORY_SOFTKEY_PATH2
MD 9676: MM_DIRECTORY_SOFTKEY_PATH3
MD 9676: MM_DIRECTORY_SOFTKEY_PATH4
The display machine data for the access rights are effective immediately, i.e., after
switching to the relevant application. A restart is not required.
IM2/3-24
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
© Siemens AG, 2005. All rights reserved
08/2005