Instruction Examples - Siemens SINUMERIK 840D sl Commissioning Manual

08/2005
User data definition file
GUD file accessed on reading/writing of variables.
Graphics file
File name of a BMP graphic to be inserted.
See User Interface book, BE1: Chapter, Screen elements, pictures.
Display time or acknowledgement variable
Display time
Acknowledgment variable
Text variables
Screen header or comment text from a text variable in the COM file.
Acknowledgment mode
"S"

9.2 Instruction examples

MMC command in the parts program
MMC("CYCLES;PICTURE_ON;T_SK.COM, PIC-
Operating area
Command "Picture ON/OFF"
*) On the MMC103/PCU 50, the file is named T_SK_GR.COM for example, but is
called here without language identifier "GR".
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
Synchronous, acknowledgment via "OK" softkey
Com file name*) in
cycle directory
Dialog screen name
User data definition file
Graphics file (not HMI Embedded)
Acknowledgement variable (or display time in
"N") mode) (not HMI Embedded)
Screen header or comment from
text variable (from COM file)
Starting Up HMI Embedded (IM2)
9 Configure Windows in the NC Program
in acknowledgment mode "N"
in acknowledgment mode "A"
MGUD.DEF, PICTURE
_3.AWB,
TURE1,
Acknowledgement mode:
Synchronous, Asynchronous, No ack.
TEST_1, A1", "S")
IM2/9-125