08/2005
;LanguageList= ... , GR
;FontList= ... , Europe
;FontListKO= ... , Europe2
;LBList= ... , german
SkSelectLngInsteadSkChangeLng=False
Note
In the [HELP_EXTENSION] section, the HelpFileExtension parameter must be
set to 0 (WinHelp) if you want old, OEM-specific help files with the extension *.hlp
to be displayed.
2.5.12 IF.INI
[TECHNOLOGY]
; "m"
; "t"
; "g"
; "s"
; "p"
; "a"
; Notation in the section e.g.:
Technology=m
[TEXTFILES]
Siemens=Cst.dir\ifs_gr.com
SiemensI=Cst.dir\ifit_gr.com
Manufacturer= ...
End user=
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
= milling
= turning
= grinding
= nibbling
= punching
= display all technologies
; Siemens = DH\CST.DIR\IFS_GR.COM
; SiemensI=
DH\CST.DIR\IFIT_GR.COM
; SiemensI=
DH\CST.DIR\IFIM_GR.COM
; Machine manufacturer = DH\CST.DIR\IFM_GR.COM
; Machine manufacturer = DH\CST.DIR\IFI_GR.COM
; End user = DH\CST.DIR\USER_GR.COM
; Notation in the section e.g.:
Commissioning HMI Advanced (IM4)
2 Functions/Parameterization
ISO turning or
ISO milling
IM4/2-91