Cross-Channel Status Display With Icons - Siemens SINUMERIK 840D sl Commissioning Manual

Commissioning HMI Advanced (IM4)
2 Setting Functions and Parameters

2.1.6 Cross-Channel Status Display with Icons

Function
The status of the following components can be output with icons in the program
status line (header):
• Channels
• Spindles
• Machine states
• Machine states only
In addition to SINUMERIK icons, manufacturer-defined icons can also be used
(configurable using the HEADER.INI file and DB19 DBB32-34).
SINUMERIK icons
The following SINUMERIK icons are available (name in brackets):
Channel status
Feed stop
Spindle status
Storing the SINUMERIK icons
The SINUMERIK icons are stored in
F:\HMI_ADV\ICONS\640
F:\HMI_ADV\ICONS\800
F:\HMI_ADV\ICONS\1024 (for 1024x768 screen)
The dimensions of the SINUMERIK icons are as follows:
Resolution 640x480:
Resolution 800x600:
Resolution 1024x768:
Colors: TrueColor
IM4/2-26
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
Channel RESET
Channel active
Channel interrupted
Feed is not enabled
Spindle is turning
counterclockwise
Spindle is turning clockwise
Spindle not enabled
Spindle STOP
(for 640x480 screen)
(for 800x600 screen)
16x16 pixels
20x20 pixels
27x26 pixels
NC_RESET.BMP)
(NC_START.BMP)
(NC_STOP.BMP)
(FEEDSTOP.BMP)
(SPNDLEFT.BMP)
(SPNDRGHT.BMP)
(SPNDSTOP.BMP)
(SPNDM05.BMP)
© Siemens AG, 2005. All rights reserved
08/2005