Example Program 3: Mmc Command With Synchronous; Acknowledgment Mode - Siemens SINUMERIK 840D sl Commissioning Manual

Commissioning cnc part 2 (hmi)

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

The comment text from the COM file (USER VAR TEST_1) is expanded in this

example at the position of the first wild card (%1) by the contents of the text

variable "G1optional text variable". By calling the text variables contained in the

MMC command (9th to 23rd parameters), messages or names can be "composed"

in this way.

9.5 Example program 3: MMC command with synchronous

Parts program

MMC("CYCLES,PICTURE_ON,T_SK.COM,SCREEN1,GUD4.DEF,,,F1","S")

N20 TEST_1 = 5

N25 MMC("CYCLES, PICTURE_OFF","N")

Dialog screen file (*.COM)

//C1(SCREEN1)

(R///USER VAR TEST_1/W/TEST_1///)

Text variable

F1 = ...Example3: MMC command with synchronous acknowledgment mode...

Example 3: MMC command with synchronous acknowledgement mode

ANW.VAR TEST_1

The user variable Test_1 is displayed until the "OK" softkey is pressed.

The user variable has also been overwritten with the value 5 here.

Without STOPRE, this assignment would be carried out before the keyboard input

(after it with STOPRE).

SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition

Starting Up HMI Embedded (IM2)

9 Configure Windows in the NC Program

Table of Contents