Setting Log File; Displaying Log File - Siemens SINUMERIK 840D sl Commissioning Manual

Commissioning HMI Advanced (IM4)
4 Diagnostics

4.1.1 Setting Log File

The log is output in English.
The log file is divided into 4 columns:
• Date
• Time
• NCU name
• Event
Example of a log file:
Date Time
01.09.99 06:22:48
========================================================================
01.09.99 06:22:48
01.09.99 06:22:48
01.09.99 06:22:48
01.09.99 06:22:48
01.09.99 06:24:52
01.09.99 06:24:52
01.99.99 06:25:05
01.09.99 06:37:58

4.1.2 Displaying Log File

Displaying log file
The display is password-protected. The current log file is displayed on the screen
of the operator panel front in the Diagnostics operating area in the Service Displays
-> Action Log menu in the "Action Log File" screen.
Setting action log
The "Action log settings" screen is available in the Startup operating area in the
HMI → System Settings → Action Log menu. The selected setting must be
confirmed by pressing the "Save Settings" softkey.
Here you can:
• Enable and disable logging
• Select the data to be logged
− Alarm status change
− Softkey actuation
− Channel status/override
− Data writing
− File accesses
− Instructions
IM4/4-162
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
NCU name Event specification
local
local ACTIONLOG: HMI Booting (OutputSelect:0x0
CommitLatency:-1 , FileSize:40000)
local ACTIONLOG: Monitored Variable
/Plc/Datablock/Byte[c19,0]
local ACTIONLOG: Monitored Variable
/Channel/ProgramInfo/msg
MachineSwitch ACTIONLOG: variable "
/Channel/ProgramInfo/msg " =
NCU840D application:RE;state:-992;softkey:-1;etc:0
NCU840D application:RE;state:-990;softkey:-1;etc:0
NCU840D application:RE;state:-992;softkey:-1;etc:0
local ACTIONLOG: HMI Terminates
© Siemens AG, 2005. All rights reserved
08/2005