Siemens SINUMERIK 840D sl Commissioning Manual page 422

Commissioning HMI Advanced (IM4)
2 Setting Functions and Parameters
Spindle number:
2 channel status
The channel status and spindle status are output as an icon at the display position
(spindle status can be output deliberately, for example). The channel status icons
can be superimposed with the "Feed not enabled" icon.
The following hierarchy applies (from highest to lowest priority):
1. Channel STOP
2. Feed is not enabled
3. Channel active
4. Channel RESET
Syntax:
ChanStatFeedStop = <Channel number>
3 channel status
The channel status is output as an icon at the display position. Feed stop is also
output in the feed window in the Machine operating area, for example.
Syntax:
ChanStat = <Channel number>
4 spindle status
The spindle status is output as an icon at the display position.
Syntax:
SpindStat = <Spindle number> , Chan <Channel number>
If the channel number is not specified, then the spindle status for the current
channel is displayed. If the channel is changed, the display is updated accordingly.
Configuration with HEADER.INI
The assignment of the cross-channel status display is defined in the HEADER.INI
file. It can optionally be configured with SINUMERIK and/or user icons.
IM4/2-28
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
Numbers of the "logical" spindles to be included
(programmed in the DIN code with S1 to Sn; if more than
one applicable entry, the higher number is displayed)
Channel number:
Channel number:
Spindle number:
Channel number:
(Highest priority)
(Lowest priority)
Number of channel
Number of channel
Number of (logical) spindle
Number of channel optional
© Siemens AG, 2005. All rights reserved
08/2005