Mouse Operability With Hmi Embedded Win32 - Siemens SINUMERIK 840D Operator's Manual

2
03.04

2.3.8 Mouse operability with HMI Embedded Win32

Single-click
Double-click
Drag depressed mouse
button
Click the scroll bar
Double-click a program
Click selection field
Click check field
Note
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
2.3 Machine control panel keys
The HMI Embedded Win32 software with the PCU 50/70/ PC
hardware can also be operated with a mouse.
Right mouse button functionality
Right clicking the mouse has the same effect as activating the area
switchover key.
Left mouse button functionality
•
The dialog cursor is positioned on a closed IO field; input starts
with the first character.
•
If the IO field is open, it closes and the input is not validated.
When you enter a value, the old value is deleted.
•
If you click a character in an open field, the mouse pointer is
positioned after the last character in the string.
The field is opened in input mode, the editor cursor is positioned on
the first character.
The characters are highlighted according to the mouse position.
Paging though
Open the program
Click characters in open part program
Make next selection
Invert field, make next selection
This function is not supported on the PCU 20.
Operator Components/Operating Sequences
2
2-43