Siemens SINUMERIK 840D sl Commissioning Manual page 441

08/2005
Configuring texts for softkeys
Plain text identifiers for selecting network drive connections with softkeys can be
stored as language-dependent user alarm texts under numbers 89901 to 89905 in
a user text file that is known to the message block (see MBDDE.INI, [TextFiles]
section). Text number 89901 correlates here to
MD 9676 CMM_DIRECTORY_SOFTKEY_PATH1, etc.
Example:
MBDDE.INI:
...
[TextFiles]
USER_PLC=F:\DH\MB.DIR\MYTXT_
MYTXT_GR.COM:
89901 0 0 ""
89902 0 0 "F:\R4711"
89903 0 0 "R4712/
89904 0 0 "R4713/
...
Operation
The network drives are available in the following operating areas:
• In the MACHINE operating area on the expanded SK (softkey) bar behind the
"Program overview" softkey
• In the PROGRAM operating area as an extended softkey bar in the main menu
• In the SERVICES operating area under "Manage data" (if 3 network drives are
configured, 3 are displayed directly as horizontal softkeys, the fourth is
accessed by pressing the ETC button)
• in the SERVICES operating area under "Data on" and "Data off" under the
second vertical softkey "Network drives ..."
The softkeys in the expanded softkey bar are assigned accordingly to MD 9676
(SK1) to 9679 (SK4) (i.e., with gaps if necessary). The plain text identifier is used
as the softkey text. If a plain text identifier is not configured, the value of the
corresponding machine data is shown.
Assigning access authorizations for drives/computers
Access rights are configured individually for each drive in the following display
machine data:
•
For the Program and Services areas:
$MM_USER_CLASS_DIRECTORY1_P (9510)
$MM_USER_CLASS_DIRECTORY2_P (9511)
$MM_USER_CLASS_DIRECTORY3_P (9512)
$MM_USER_CLASS_DIRECTORY4_P (9513)
•
For the Machine area:
$MM_USER_CLASS_DIRECTORY1_M (9516)
$MM_USER_CLASS_DIRECTORY2_M (9517)
$MM_USER_CLASS_DIRECTORY3_M (9518)
$MM_USER_CLASS_DIRECTORY4_M (9519)
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
Reserved
Softkey text for softkey 2
MMC1" Softkey text for softkey 3
MMC2" Softkey text for softkey 4
(2 blanks denote a line break)
Commissioning HMI Advanced (IM4)
2 Setting Functions and Parameters
IM4/2-47