Siemens SINUMERIK 840D sl Commissioning Manual page 347

08/2005
The language-dependent subdirectories for the installed languages are already set
up in the "siemens" directory.
They will have to be created in the "oem" and "user" directories, if required.
Create directory
You can create the language-dependent directories (deu, eng, etc.; see Table 5-5)
in the "oem" and "user" directories.
Press softkeys "Start-up" → "HMI" → "Editor" → "File Function" → "New".
!
Important
Directory names must be written in lower case letters,
e.g., deu.
An external keyboard is required to write in lower case!
Editable alarm text files
In-house texts can be inserted into the directories (oem/user) using the following
files:
In the "hmi" subdirectory (/oem/sinumerik/hmi/lng/deu):
alpu.txt
-
alsi.txt
-
alc.txt
-
In the "cycles" subdirectory (/oem/sinumerik/cycles/lng/deu):
aluc.txt
-
alzu.txt
-
Foreground or background language
HMI Embedded sl is supplied with six standard languages. Two additional foreign
languages can also be installed.
The installation allows you to choose any combination of two of these languages
as the foreground and background language.
The language is changed using the "Change Language" vertical softkey.
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
PLC alarm/message texts
Safety Integrated alarm texts
Compile cycles alarm text
User-cycle and tool-management texts
Amend texts for user interface (wizard)
User-cycle alarm texts
Starting Up HMI Embedded (IM2)
5 Creating In-House Alarm Texts
IM2/5-97