Siemens SINUMERIK 840D sl Commissioning Manual page 558

Commissioning HMI Advanced (IM4)
4 Diagnostics
The memory location is fixed and cannot be changed.
Start-up
Channel RESET
Action log settings
Logging ON
Logged files
Change of alarm status
Keys (Shop Mill only
Channel status / Override
Writing of data
File access
Instructions (PI services program invocation)
File
display
Figure 4-1
Operating sequence
1. Switch on the control.
2. During startup, a log file is scanned for crash files. If one or more crash files
exist, the following message appears:
"The action log (crash) is filed in the part program directory for output (files
AC_LOG?.TXT). Please confirm that you will file out the files immediately after
start of HMI (V24, Disk, etc.). "
The available crash files (AC_LOGP1.TXT to AC_LOGPn.TXT) are copied to
the part program directory.
3. Once the controller is started up, you can read out the log files from the
Services operating area in the Data Out -> Via USB menu.
IM4/4-164
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
Write interval file
File size log file
Path of log file
Write trigger via alarms
Query Symbols Templates
Log File Settings
Program aborted
Action log Trace
© Siemens AG, 2005. All rights reserved
08/2005
Save
settings
HMI exit
mode