Siemens SINUMERIK 840D sl Commissioning Manual page 363

08/2005
Areas
NC
CH
AX
TO
COMPLETE
INITIAL
Types
TEA
SEA
OPT
TOA
UFR
EEC
CEC
QEC
PRO
RPA
GUD
INI
_N_COMPLETE_TEA
_N_AX_TEA
_N_CH1_TEA
_N_CH1_GUD
_N_INITIAL_INI
References:
7.1.2 Data backup in HMI Embedded
All furnished drives are available for a data backup.
As a general rule, all modified files and programs are stored directly on the
CompactFlash card in a permanently defined tree structure. From there, they can
be copied to other memory locations over the set up drives.
Procedure
Use the same procedure as described in the "Series start-up" section.
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
General NC-specific data
Channel-specific data (unit corresponds to the channel
number)
Axis-specific data (unit corresponds to the number of the
machine axis)
Tool data
All data of an area
Data for all areas (_N_INITIAL_INI)
Machine data
Setting data
Option data
Tool data
User input frames: Settable Work offset, rotations, etc.
Measuring system error compensation
Sag/angularity compensation
Quadrant error compensation
Protection zone
R parameters
Global user data
General initialization program (all data in the active file
systems)
Archiving of all machine data
Archiving of all axis machine data
Archiving of the machine data for channel 1
Archiving of the global user data for channel 1
Archiving of all data in the active file system
/IDsl/ Installation and Start-up Manual CNC Part 1 (NCK, PLC,
Drive)
Starting Up HMI Embedded (IM2)
7 Data Backup
IM2/7-113