Siemens SINUMERIK 840D sl Commissioning Manual page 439

08/2005
Operation
If display MD 9009 is set to "CAPSLOCK on" and you want to enter lower case
text, proceed as follows:
Press CTRL + SHIFT to switch to lower case text entry. To reset text entry from
lower case back to upper case, press CTRL + SHIFT again.
Restrictions
•
When the CAPSLOCK function is activated, the SHIFT key has no effect on
letter keys.
•
As is the case in standard Windows applications, CTRL/ALT key sequences
only work in lower case mode.
•
Switching to lower case mode is not available on keyboards that are integrated
in the OP.
•
The CTRL + SHIFT switching sequence only works with external PS2
keyboards and USB PC keyboards, not with panel keyboards.
Note
The OP keyboard enters lower case text if CAPSLOCK is set on an external
keyboard. If the external keyboard is unplugged in this state, the CAPSLOCK
mode cannot be cancelled.
The CAPSLOCK and NUMLOCK keys can be filtered by a corresponding setting
in parameter file E:\\Windows\System.ini.
The default setting for CAPSLOCK and NUMLOCK is not filtered.
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
Commissioning HMI Advanced (IM4)
2 Setting Functions and Parameters
IM4/2-45