Installing Hmi Software On A Pc - Siemens SINUMERIK 840D sl Commissioning Manual

Commissioning HMI Advanced (IM4)
5 HMI software on PC

5.1 Installing HMI Software on a PC

Requirements
Target system
Operating system
MPI driver
NC interface (SINUMERIK powerline)
NC interface (SINUMERIK solution line)
"Small fonts" must be selected under "Control Panel/Display, Settings".
Software
• Name:
• Installation language:
• Distribution medium
• Uninstallable
Operating sequence
1. Insert the CD in the CD drive
2. Start setup.exe
3. Select language
4. Specify the target directory: Any
5. For SINUMERIK powerline, select:
- Online with communication to NC
- The system asks whether you wish to install the MPI drivers
- Local without communication to NC, with NC simulation
6. For SINUMERIK solution line, select:
- Online with communication to NC
7. The system lists all the entries you have made
8. On confirmation the copy operation starts
9. At the end of the copying operation, you are prompted to restart the PC.
IM4/5-166
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
Standard PC with
600 MHz, 256 MB RAM
Available hard disk space: 500 MB
MS Windows XP Professional
Version 6
CP5511, CP5611
Network connection (Ethernet)
HMI Advanced for PC/PG
German/English
CD
Yes
© Siemens AG, 2005. All rights reserved
08/2005