Overview; Creating A New Text File - Siemens SINUMERIK 840D sl Commissioning Manual

Commissioning cnc part 2 (hmi)

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Creating Foreign Language Texts with Windows 2000/ 2003/ XP (TX2)

2 Editing Files with Word 2000/ 2003

2.1 Overview

This section describes how text files can be edited using Microsoft Word 2000.

Word 2000 does not edit text files

directly. Instead, it converts them to

Word files upon opening.

During saving Word can then convert

the edited text back into a text file.

Create a new text file in the usual way, using one of the following methods:

In Windows Explorer click on the command "File"

Launch Notepad without a file. A new empty file is then opened.

Then select the command "File"

Make a copy of an existing text file you wish to use as a template for the new

Now open the text file with Word 2000/ 2003 in the way described in the next

SINUMERIK 840D sl/840D/840Di/810D Commissioning CNC Part 2 (HMI) (IAM) – 08/2005 Edition

We recommend saving an additional

version of the text file as a Word file

and using this version as the basis for

future editing.

It is then no longer necessary to open

and convert the file.

"Text File".

Table of Contents