Overview By Means Of Ini Files; Aeditor. Ini - Siemens SINUMERIK 840D sl Commissioning Manual

08/2005

2.5 Overview by Means of INI Files

Note
This section provides an alphabetical listing of all INI files indicating the sections
that can be changed by the machine manufacturer or end user. All other
sections must not be changed!

2.5.1 AEDITOR. INI

Information about the ASCII editor can be found in the AEDITOR.INI file.
[MEMORY]
MemFactor=f
Editor access authorizations can be modified in section
[ACCESSLEVEL]
GlobalReplace=6
SettingHiddenCheck=7
Enable_Simulation = 7
[MMC_Wizard]
AEDITOR=AEDITOR.COM
[MEMORY]
; default factor for maximum size of file
; valid values are: from 1 to 31
; factor x (1<=x<=31) means: you can edit a file up to a maximum size of
x * 8 MB
; for example: factor 1 = maximum size of 8 MB, 31 = 248 MB
; attention: a higher factor needs more RAM
; the application can override this default factor
MemFactor=2
; default factor for maximum size of buffer file for editing NC domains
; see explanation for MemFactor above
; the factor should be high enough for the whole NCU memory
; the application cannot override this default factor
MemNCFactor=2
; Number of steps (input lines!), that the ASCII editor
; can reset (Undo)/restore (Redo).
; Default=0: No Undo/Redo steps can be activated
; > 0 max. 32767 only applies if the setting for UndoHandling does not equal 2.
NrOfUndoSteps=10
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
section defines the size of the editable files.
; f stands for 8 MB units. Permissible values are 1<=f<=31
; corresponding to 8 MB to 248 MB
; Softkey simulation can be hidden
; in the editor
; BE1
Commissioning HMI Advanced (IM4)
2 Functions/Parameterization
IM4/2-81