Memory Configuration For The Simulation - Siemens SINUMERIK 840D sl Commissioning Manual

Commissioning HMI Advanced (IM4)
2 Functions/Parameterization

2.6.5 Memory Configuration for the Simulation

Function
To avoid having to carry out memory settings in NC machine data if additional
memory is needed for the simulation, these settings can be carried out in the
DPSIMNCK.INI file in the [DP_SIMNCK] section.
The default values for the simulation are entered in the DPSIMNCK.INI file in the
[DP_SIMNCK] section, generally eliminating the need for additional memory
settings in the NC. These offset values have a cumulative effect on machine
data with the same name.
Negative values are ignored.
DPSIMNCK.INI [DP_SIMNCK]
The following entries with default values are contained in the [DP_SIMNCK]
section:
...
[DP_SIMNCK]
DP_SIMNCK_MM_NUM_GUD_MODULES_OFFSET = 0
DP_SIMNCK_MM_NUM_GUD_NAMES_NCK_OFFSET = 5
DP_SIMNCK_MM_NUM_GUD_NAMES_CHAN_OFFSET = 30
DP_SIMNCK_MM_GUD_VALUES_MEM_OFFSET = 20
DP_SIMNCK_MM_NUM_USER_MACROS_OFFSET = 10
DP_SIMNCK_MM_NUM_MAX_FUNC_NAMES_OFFSET = 40
DP_SIMNCK_MM_NUM_MAX_FUNC_PARAM_OFFSET = 350
DP_SIMNCK_MM_MAX_SIZE_OF_LUD_VALUE_OFFSET = 400
...
IM4/2-132
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
corresponding machine data:
18118 MM_NUM_GUD_MODULES
corresponding machine data:
18120 MM_NUM_GUD_NAMES_NCK
corresponding machine data:
18130 MM_NUM_GUD_NAMES_CHAN
corresponding machine data:
18150 MM_GUD_VALUES_MEM
corresponding machine data:
18160 MM_NUM_USER_MACROS
corresponding machine data:
18170 MM_NUM_MAX_FUNC_NAMES
corresponding machine data:
18180 MM_NUM_MAX_FUNC_PARAM
corresponding machine data:
18242 MM_MAX_SIZE_OF_LUD_VALUE
© Siemens AG, 2005. All rights reserved
08/2005