Siemens SINUMERIK 840D sl Commissioning Manual page 75

Commissioning cnc part 2 (hmi)

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Display for example 3

PRESS(RECALL)

RECALL.ac = 1

If you do not assign any action (function, calculation of variables, property changes)

to RECALL, you can use it to exit newly configured user interfaces and return to

the standard application.

Start softkeys

Start softkeys are softkeys that are not called from a form screen, but which have

been configured before the first new screen form.

Start softkeys can be used to initiate certain functions. There are various ways to

define start softkeys. See "Methods syntax" for information about how to define

SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition

Graphics and softkeys

In addition to the horizontal and vertical softkeys, a RECALL key is

also available.

In contrast to the softkeys, the RECALL key does not need to be

defined. The status and access level properties can be assigned to the

key during runtime.

Expanding the Operator Interface (BE1)

Chapters

Table of Contents