Siemens SINUMERIK 840D sl Commissioning Manual page 121

08/2005
Cycle-specific entries with the following form are located in the particular paket.ini
files:
[cycleName]
Mname=
Dir=
Dname=
Output
Anzp=
Version=
Code_typ=
Example
[CYCLE83]
Mname=CYC83
Dir=cst.dir
Output=bohren.ini
Anzp=17
Version=3
Code_typ=0
Details
A differentiation is made between various versions of cycles with the same name
using the version number.
Main block/secondary block and block numbers in front of the cycle call are kept
unchanged.
Cycle call line in the parts program:
/1234 :44 CYCLE94(, , )
After expansion by the string and ;# lines:
;NCG#CYC94#\CST.DIR\DREHEN.COM#NC1#1#*NCG;*RO*;*HD*
;##########*NCG;*RO*;*HD*
/1234 :44 CYCLE94(,,"",)
;#END#*NCG;*RO*;*HD*
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
Name of the cycle' as section entry
mandatory, screen form name
mandatory, directory of the file with the screen form information
mandatory, file with screen form information
mandatory, name of the OUTPUT block
mandatory, number of parameters (defined variables)
optional, cycle version, without data 0
optional, output with = 0 or without = 1 ;# lines
Expanding the Operator Interface (BE1)
4 Programming Support System
BE1/4-115