List Of Pl Services - Siemens SINUMERIK 840D sl Commissioning Manual

Commissioning cnc part 2 (hmi)

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Expanding the Operator Interface (BE1)

8 Terms, Tables, Lists, Examples

8.5 List of Pl services

PI_SERVICE(service, n parameter)

An interrupt number in the specified channel is assigned to a parts program

stored in the NCK (identified by path name and program name). This PI

service is identical to program instruction 'SETINT'.

Par1 Interrupt number (0 – 8)

Par2 Priority (0–8)

Par3 Liftfast (0, 1)

Par4 Block synchronization (0, 1)

Par5 Path data with max. 32 positions

Assignment of interrupt 5 to program MPF_DIR/TEST_MPF in the current

channel. The interrupt has priority 3 and is executed without rapid lift on the

PI_SERVICE("_N_ASUP__",5, 3, 0, 0,"/_N_MPF_DIR/_N_TEST_MPF")

All alarms with the "Cancel Alarm" classification can be acknowledged with

this command. Individual acknowledgment for specific alarms is not

All alarms with the "Cancel Alarm" classification are reset.

PI_SERVICE("_N_CANCEL")

SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition

Identifier of PI service

List of PI service parameters.

Individual parameters are separated by commas.

Table of Contents