Siemens SINUMERIK 840D sl Commissioning Manual page 73

08/2005
Access level
ac0
...
ac7
For meaning see Table 3-6
Default setting: AC7
Status
se1
se2
se3
Default setting: se1
VS7=("Abort", ac1, se3)
VS8=("OK", ac6, se2)
The properties Text, Access Level and Status can be changed in the methods
when the application is running:
SK.st = Text
SK.ac = Access level
SK.se = Status
where:
Access Level
0
...
7
For meaning see Table 3-6.
Status
1
2
3
See above for explanation of parameters.
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
visible
disabled (gray text)
displayed (last softkey used)
"Abort"
visible
disabled (gray text)
displayed (last softkey used)
Expanding the Operator Interface (BE1)
;Define softkey VS7 and assign
;the text "Abort", the access level 1
;and the status "displayed".
;Define softkey VS8 and assign
;the text "OK", the access level 6
;and the status "cannot be used".
;Softkey, e.g., the text "Abort"
;Softkey, e.g., with access level 4
;Softkey, e.g., with status 2
3 Syntax
BE1/3-67