Siemens SINUMERIK 840D sl Commissioning Manual page 313

08/2005
"Magazine OEM":
"Tool parameter":
"Tool management":
Memory allocation: global user data
When you select the "Global user data" area and click the "Details" softkey, you
can display and edit the memory settings in the machine data of the following
areas:
"GUD files":
"Number of variables":
Memory allocation: curve tables
When you select the "Curve tables" area and click the "Details" softkey, you can
display and edit the memory settings in the following machine data:
Memory allocation: compensation
When you select the "Compensations" area and click the "Details" softkey, you can
display and edit the memory settings in the machine data of the following areas:
"Sag compens.":
These configuring machine data are indexed machine data. The index is set in the
top half of the screen.
"E. error compens.":
There are only two tables for the encoder/spindle compensation interpolation
points. There is no need to select an index.
"Q. error compens.":
There is only one table for quadrant error compensation. There is no need to select
an index.
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
MD 18090: MM_NUM_CC_MAGAZINE_PARAM
MD 18092: MM_NUM_CC_MAGLOC_PARAM
MD 18094: MM_NUM_CC_TOA_PARAM
MD 18096: MM_ NUM_CC_TDA_PARAM
MD 18098: MM_ NUM_CC_MON_PARAM
MD 18080: MM_TOOL_MANAGEMENT_MASK
MD 18118: MM_NUM_GUD_MODULES
MD 18150: MM_GUD_VALUES_MEM
MD 18120: MM_NUM_GUD_NAMES_NCK
MD 18130: MM_NUM_GUD_NAMES_CHAN
MD 18400: MM_NUM_CURVE_TABS
MD 18402: MM_NUM_CURVE_SEGMENTS
MD 18404: MM_NUM_CURVE_POLYNOMS
MD 18342: MM_NUM_CEC_MAX_POINTS[ ]
MD 38000: MM_ENC_COMP_MAX_ POINTS[0]
MD 38000: MM_ENC_COMP_MAX_ POINTS[1]
MD 38010: MM_QEC_MAX_POINTS[0]
Starting Up HMI Embedded (IM2)
4 Functions/Parameterization
IM2/4-63