Siemens SINUMERIK 840D sl Commissioning Manual page 201

08/2005
Name
$TC_SCP...
$TC_SCPx
$TC_TP1
$TC_TP10
$TC_TP11
$TC_TP2
$TC_TP3
$TC_TP4
$TC_TP5
$TC_TP6
$TC_TP7
$TC_TP8
$TC_TP9
$TC_TPCx[y]
$TC_TPG1
$TC_TPG2
$TC_TPG3
$TC_TPG4
$TC_TPG5
$TC_TPG6
$TC_TPG7
$TC_TPG8
$TC_TPG9
$VA_COUP_OFFS[x]
$VA_IS[x]
$VA_VACTM[x]
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
Index
x=13,...21,....71
x=ParameterNo
y=ToolNo
x=Axis
x=Axis
x=Axis
Expanding the Operator Interface (BE1)
8 Terms, Tables, Lists, Examples
Description
Location-dependent wear correction
No. total offset pars. per total offset block
DUPLO number
Tool search type for replacement tools
Tool information for HMI
Tool designation
Size to left in half locations
Size to right in half locations
Size upwards in half locations
Size downwards in half locations
Magazine location type
Tool status
Tool monitoring method
User-defined tool parameter
Spindle number
Chaining rule
Minimum wheel diameter
Minimum grinding wheel width
Current width of grinding wheel
Maximum speed of grinding wheel
Maximum grinding wheel peripheral speed
Angle of inclination of inclined grinding wheel
Compensation parameter for GWPS
Offset to leading axis / leading spindle, actual value
Safe actual position of axis
Actual-value, load-end axis velocity in MCS system
BE1/8-195