Table of Contents
Advertisement
7.
Remove the air baffle (Remove the air baffle).
8.
Remove the HPE Persistent Memory module.
9.
Install the new HPE Persistent Memory module, and review the persistent memory configuration of the system.
For more information, see Configuring the system for HPE Persistent Memory.
10. If you are relocating the HPE Persistent Memory module to or from another system, see the HPE Persistent
Memory module relocation guidelines.
HPE Persistent Memory module-processor compatibility
HPE Persistent Memory modules are supported only in systems with second-generation Intel Xeon Scalable processors
installed.
Configuring the system for HPE Persistent Memory
After installing HPE Persistent Memory modules, configure the system for HPE Persistent Memory.
IMPORTANT: Always follow recommendations from your software application provider for high-availability best
practices to ensure maximum uptime and data protection.
A number of configuration tools are available, including:
•
UEFI System Utilities—Access System Utilities through the Remote Console to configure the system by pressing the
F9 key during POST.
•
iLO RESTful API—Use the iLO RESTful API through tools such as the RESTful Interface Tool (ilorest) or other third-
party tools.
•
HPE Persistent Memory Management Utility—The HPE Persistent Memory Management Utility is a desktop
application used to configure the system for HPE Persistent Memory, as well as evaluate and monitor the system
memory configuration layout.
For more information, see the HPE Persistent Memory User Guide on the Hewlett Packard Enterprise website (https://
www.hpe.com/info/persistentmemory-docs).
HPE Persistent Memory module relocation guidelines
Observe the relocation guidelines when doing the following:
Removal and replacement procedures
65
Advertisement
Table of Contents
