Step 1 - Input Signals - Polycom SoundStructure C16 Design Manual

Input Signals
Input Signal Meters
Changing the settings of all members in the group individually to a common value
does not cause the virtual channel group to show that common value.
The settings that can be applied to input channels depend on the type of vir-
tual channel created from that physical input. For example there are different
controls if the signal is a microphone input, line level input, a stereo virtual
channel, a signal generator, or a telco input.
All these input channels have meters that will show the signal activity. The
meters may be enabled from the Tools menu or from the lower right hand
corner of the screen. To enable the signal meters from the Tools menu, select
the menu item Tools and then Options. Choose the meters entry and select
Customizing SoundStructure Designs
5 - 13