The Soundstructure Voip Interface - Polycom SoundStructure C16 Design Manual

The SoundStructure VoIP Interface

Introduction
In this chapter you will learn how to create a SoundStructure design with the
SoundStructure VoIP interface and how to integrate that SoundStructure
design into a SIP environment.
This chapter begins with an introduction to the SoundStructure VoIP Interface,
followed by detailed information on setting up the SoundStructure VoIP
Interface.
The SoundStructure VoIP Interface is a plug-in card for SoundStructure sys-
tems that is a high-quality SIP-based end-point. This card has been designed
to inter-operate with other compatible equipment including application serv-
ers, media servers, internet-working gateways, voice bridges, and other
end-points. The SoundStructure VoIP Interface uses the industry-leading
Polycom UC Software that is the foundation of the SoundPoint IP and Sound-
Station IP phones.
The SoundStructure system can be controlled by a third-party remote control
system. The control system will send API commands to the SoundStructure
system to cause the SoundStructure system to take the SoundStructure VoIP
12
12 - 1