Soundstructure Voip Interface Settings On The Wiring Page - Polycom SoundStructure C16 Design Manual

Hide thumbs Also See for SoundStructure C16:

Table of Contents

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12

SoundStructure VoIP Interface Settings on the Wiring Page

Setting an IP address with SoundStructure Studio

The wiring page has several options for configuring the SoundStructure VoIP

Interface that are active only when connected online with a SoundStructure

system that has a SoundStructure VoIP Interface.

Edit Network Settings

Web Configuration

Local Configuration

Factory Reset

You can set the IP address and other Ethernet settings of the SoundStructure

VoIP Interface via SoundStructure Studio when connected to an online Sound-

Structure system. To set Ethernet settings use the following steps:

1. Connect to the SoundStructure system with SoundStructure Studio and

select the Wiring page

Opens the VoIP Network Settings user interface control

for manually configuring the Ethernet settings for the

SoundStructure VoIP Interface.

Launches the default browser with the IP address of the

SoundStructure VoIP Interface.

Resets to default values the auto answer, entry and exit

tones, Do Not Disturb, and ringtone selection settings in

the Telephony Settings. You will be prompted to the

confirm after selecting this option.

Resets the SoundStructure VoIP Interface to its factory

default settings. This will clear all Ethernet settings,

provisioning server settings, line registrations, and all

other VoIP-specific parameters. You will be prompted to

confirm after selecting this option. Before using this

option you may want to use the Utilities > Phone

Backup and Restore options from the Web

Configuration Utility to save the VoIP-specific settings.

Show Quick Links

Table of Contents