Polycom SoundStructure C16 Design Manual page 335

Configuring a Line Registration
To configure a line registration, navigate to the Settings > Lines option and
select a line. The line settings appear as shown next.
Enter the information as described in the table below.
Name Possible Values
Display Name Any string up to 256
characters
Address Any string up to 256
characters
Authentication Any string up to 256
User ID characters
Authentication Any string up to 256
Password characters
Label Any string up to 256
characters
Description
The display name used in SIP signaling that your phone
uses as the default caller ID. This name is displayed on
the call recipient's phone.
Enter a line identification address that the phone uses to
register with the server. The address may include a user
name, or the host of the phone's SIP URI. For example,
if the phone's line is 1002@polycom.com, enter 1002 as
the SIP where polycom.com is the server. Or, you can
enter 1002@polycom.com. Any address entered will be
displayed as the phone's line if the display name and
label are not specified.
Enter the user name used to authenticate this line
registration (if applicable).
Enter the password used to authenticate this line
registration (if applicable).
Enter the text that will display next to the associated line
key. If a label isn't defined, the label will be derived from
the user part of the address.
The SoundStructure VoIP Interface
12 - 37