Polycom SoundStructure C16 Design Manual page 595

Argument Argument value
Virt Chans Mono
Default
Event Source No
Description
This parameter sets the username for the provisioning server used by the VoIP
interface.
voip_reboot
Argument Argument value
Channel Type Virtual Channel
Value Type Void
Read/Write Mode Write-Only
Phys Chans VoIP Telephony Output
Virt Chans Mono
Event Source No
Description
Setting this parameter causes the SoundStructure VoIP Interface to reboot. The
host SoundStructure device does not reboot when this parameter is used.
voip_resume
Argument Argument value
Channel Type Virtual Channel
Value Type Void
Read/Write Mode Write-Only
Phys Chans VoIP Telephony Output
Virt Chans Mono
Event Source No
Description
Setting this parameter takes the "active call" out of hold.
Command Protocol Reference Guide
Reboot VoIP Interfacel
Resume a Call That is On Holdl
A - 79