Configuring Security Options
Setting up Polycom Touch Control log management
Setting
Time Server
Time Server Address
Time Format
Configuring Admin ID and Password for Polycom Touch Control device
It is possible to set an Admin ID and password, which limits access to the
Polycom Touch Control Administration settings.
1. From the Home screen touch
2. Touch the Security tab.
3. Set the following security settings:
Setting
Admin ID
Admin Password
It is possible to transfer the Polycom Touch Control logs to an external USB
storage device.
Integrating The Polycom Touch Control with SoundStructure Systems
Description
Specifies connection to a time server for
automatic Touch Control time settings. The
date and time must be manually reset every
time the Touch Control restarts, in the following
cases:
• Time Server is set to Off
• Time Server is set to Manual or Auto, but
the Touch Control cannot connect to a time
server successfully.
Specifies the address of the time server to use
when Time Server is set to Manual.
Specifies your format preference for the time
display and lets you enter your local time.
Administration.
Description
Specifies the ID for the administrator account.
The default Admin ID is "admin".
Specifies the password for administrator
access when logging in to the Polycom Touch
Control. When this password is set, you must
enter it to configure the Polycom Touch Control
Admin Settings. The password must not
contain spaces. The default password is "456".
11 - 11