Configuring Polycom Touch Control Regional Settings - Polycom SoundStructure C16 Design Manual

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12

Configuring Polycom Touch Control Regional Settings

11 - 10
4. Configure the following DNS settings:
Setting
Domain Name
DNS Servers
To configure the Polycom Touch Control Regional settings:
1. From the Home screen, touch
2. Touch the Location tab.
3. Select a language from the Language drop-down menu.
4. Set the Date and Time information as described in the following table.
Setting
Time Zone
Description
Displays the domain name currently assigned
to the Polycom Touch Control. If the Polycom
Touch Control does not automatically obtain a
domain name, enter one here.
Displays the DNS servers currently assigned
to the Polycom Touch Control. If the Polycom
Touch Control does not automatically obtain a
DNS server address, enter up to two DNS
servers here. You can specify IPv4 DNS server
addresses only when the IPv4 address is
entered manually. When the IPv4 address is
obtained automatically, the DNS Server
addresses are also obtained automatically.
Administration.
Description
Specifies the time difference between GMT
(Greenwich Mean Time) and your location.