Registering Lines With The Soundstructure Voip Interface - Polycom SoundStructure C16 Design Manual

Name
Boot Server Type
Option 60 Format

Registering Lines with the SoundStructure VoIP Interface

Possible Values
IP Address
String
RFC3925 binary
ASCII string
To save the settings select the save button on the bottom of the screen. Your
changes may be viewed by selecting View Modifications prior to selecting
Save.
To register one or more lines of the SoundStructure VoIP Interface with the call
management platform, you need to supply the IT/Phone system administra-
tor with the MAC address of the SoundStructure VoIP Interface and in return
the IT/Phone system administrator will provide the SIP server IP address and
line registration information including login credentials required to register
with to the SIP server.
Description
When the Boot Server parameter is set to Custom, this
parameter specifies the type of DHCP option in which
the SoundStructure VoIP Interface will look for its boot
server. The IP Address must specify the boot server.
The string must match one of the formats described for
server address.
Vendor identifying information in the format defined in
RFC 3925 which can be found at:
Vendor-Identifying Vendor Options for Dynamic Host
Configuration Protocol version 4.
For more information, refer to
Using DHCP Vendor Identifying Options With Polycom
Phones.
Note: DHCP option 125 containing the RFC 3295 for-
matted data will be sent whenever option 60 is sent.
Note: DHCP option 43 data is ignored.
Vendor identifying information in ASCII.
Note: DHCP option 125 containing the RFC 3295 for-
matted data will be sent whenever option 60 is sent.
Note: DHCP option 43 data is interpreted as encapsu-
lated DHCP options and these will take precedence
over options received outside of option 43.
The SoundStructure VoIP Interface
Technical Bulletin 54041:
12 - 35