Volume Knob Adjusts "Amplifier" Fader - Polycom SoundStructure C16 Design Manual

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12

Volume Knob Adjusts "Amplifier" Fader

9 - 32
In this example, a volume knob will be used to control volume of an output
named "Amplifier".
Step 1: Add the analog logic input
In this example a single Analog Logic Input was created and named this logic
input Volume Knob.
Step 2: Create the event that will map the volume knob to the fader
In this example, the event maps the volume knob value to the fader of the
"Amplifier" channel.