Polycom SoundStructure C16 Design Manual page 628

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
A - 112
Description
This parameter sets the RMS level (in dBFS) of the input signal above which
the limiter engages.
dp_peak_en
Argument Argument value
Channel Type Virtual Channel
Value Type Boolean
Read/Write Mode Read/Write
Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Phys Chans Line Output, Analog Telephony Input, Analog Telephony
Output, Submix, ConferenceLink Aux Input, ConferenceLink
Aux Output
Virt Chans Mono, Stereo
Default 0
Event Source No
Description
This parameter enables (1) or disables (0) the peak limiter function of the
dynamics processor. This parameter and dp_en must be enabled for the peak
limiter to function.
dp_peak_thresh
Argument Argument value
Channel Type Virtual Channel
Value Type Floating-Point
Read/Write Mode Read/Write
Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Phys Chans Line Output, Analog Telephony Input, Analog Telephony
Output, Submix, ConferenceLink Aux Input, ConferenceLink
Aux Output
Virt Chans Mono, Stereo
System Limits Minimum: -100.0, Maximum: 0.0, Resolution: 0.1
Enable Peak Limiter
Peak Limiter threshold