Dialing Two Calls On The Same Line - Polycom SoundStructure C16 Design Manual

Hide thumbs Also See for SoundStructure C16:

Table of Contents

The SoundStructure VoIP Interface

Dialing Two Calls on the Same Line

This example shows how you can dial and bridge together two calls on the

# Take the phone offhook

set phone_connect "VoIP Out" 1

# Dial the digits of the first call

set phone_dial "VoIP Out" "2029"

# Once you know the call is connected by waiting for the

# voip_call_appearance_state set to connected

val voip_call_appearance_state "VoIP Out" 1 connected

# Then you can use the conference feature to place the connected

# call on hold and get a new dialtone

set voip_conference "VoIP Out"

# Dial the second call and tell the system to dial with the

# voip_send command

set phone_dial "VoIP Out" "5148"

# a voip_send command will tell the call management to use these digits

# without waiting for any dialplan time-out

set voip_send "VoIP Out"

# Once the call is connected with the call_appearance state

val voip_call_appearance_state "VoIP Out" 1 connected

# Then send voip_conference again to merge all the parties together

set voip_conference "VoIP Out"

# Once you have the acknowledgment that the line has been answered

# by the remote party then the call has been conferenced.

val voip_call_appearance_state "VoIP Out" 1 ncas_call_conference

# To hang up the conference call phone. If either party hangs up

# first, you will still be connected to the other remote party until

# you hang up the phone

set phone_connect "VoIP Out" 0

val phone_connect "VoIP Out" 0

Show Quick Links

Table of Contents