Soundstructure Studio - Polycom SoundStructure C16 Design Manual

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12

SoundStructure Studio

4 - 2
The first step to creating a SoundStructure design is to launch the SoundStruc-
ture Studio application. If the SoundStructure Studio software is not already
installed on the local PC, it may be installed from the CD that was included
with the product. More recent versions of SoundStructure Studio may also be
available on the Polycom website - please check the Polycom website before
installing the SoundStructure Studio version that is on the CD-ROM.
System Requirements
SoundStructure Studio is supported on Microsoft's Windows XP w/ Service
Pack 2 and higher, Microsoft's Windows Vista, and Microsoft's Windows 7.
SoundStructure Studio requires:
• Microsoft .NET Framework 2.0 (automatically downloaded by installation
software) which requires 280MB of disk space on an x86 computer
architecture, and 610MB on x64 computer architecture
• 40MB of disk space
• 512MB of memory
• A display with 1024x768 resolution.
• A network interface card (wired or wireless) or serial port to connect to
SoundStructure devices
Recommended System
The recommended system for operating SoundStructure Studio has the fol-
lowing characteristics:
• 1GB (or higher) of memory
• A display with 1280x1024 resolution (or higher)
Installing SoundStructure Studio
To install SoundStructure Studio, run the StudioSetup.exe software and follow
the prompts.