Polycom SoundStructure C16 Design Manual page 566

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
set phone_flash "Phone
Out"
A - 50
val phone_flash "Phone
Out"
phone_flash_delay
Argument
Channel Type
Value Type
Read/Write Mode
Phys Chans
Virt Chans
System Limits
Default
User Limits
Supported
Event Source
Description
This parameter sets the delay (in milliseconds) for the phone_flash parameter.
Note that by default, PSTN interfaces use the flash delay determined by their
pstn_country setting. However, they can use the value of this parameter if the
pstn_flash_delay_override parameter is set to 1.
phone_ignore
Argument
Channel Type
Value Type
Read/Write Mode
Phys Chans
Virt Chans
Event Source
Flashes the phone interface associated with the virtual
channel "Phone Out" to -6dB. Note that the phone out
virtual channel name must be used, not the phone in
virtual channel name.
Argument value
Virtual Channel
Integer
Read/Write
Analog Telephony Output
Mono
Minimum: 100, Maximum: 5000
100
No
No
Argument value
Virtual Channel
Void
Write-Only
Analog Telephony Output, VoIP Telephony Output
Mono
No
Set Flash Delay
Ignore an Incoming Call